EZRoutePlanner

Trades & repair

Route planner for home inspectors

Two or three inspections are the anchors. The radon monitors, re-inspects, key pickups and lab drop-off in between are where a route planner earns its keep.

Free plan, no credit card. Works on your phone and computer.

© Mapbox © OpenStreetMap
Tuesday inspections & radon run7 stops · 14 mi
  1. HomeStart
  2. Ashworth (buyer)Full inspection, agent at end2.2 mi
  3. Radon pickup: InglewoodCollect 48-hr monitor3.7 mi
  4. Re-inspect: Sylvan ParkVerify roof + GFCI repairs0.7 mi
  5. Castellano (buyer)Inspection + sewer scope0.6 mi
  6. Radon drop: 12 SouthSet monitor, leave notice1.5 mi
  7. + 2 more stops
Back to home14 mi · 46 min driving

EZRoutePlanner for home inspectors

A home inspector route planner puts an inspection day in the shortest order: the inspections plus the radon drop-offs and pickups, re-inspects, key pickups and lab runs around them. In EZRoutePlanner you paste the day's addresses, press Optimize Route, and check the order against your fixed inspection times, which it doesn't know. On the free plan a route holds 30 stops; paid plans start at $20 a month.

Typical day
2–3 inspections of 2–4 hours each
Short stops
Radon drops and pickups, re-inspects, keys
Appointment times
Not stored: check the order against your calendar
New builds
Pin the lot on the map or paste coordinates

An example day

Tuesday inspections & radon run

This example is 7 stops on real roads in Nashville, Tennessee. In the order the list had them, the round trip is 20 mi and 1 hr 7 min of driving. Optimized, it's 14 mi and 46 min: 6.0 mi and 21 min less, 31% shorter.

An inspector's day has two or three appointments that can't move and a handful of short stops that can. EZRoutePlanner orders stops by distance and doesn't know that the Castellano inspection is at 1:00, so look over the optimized order and move the fixed inspections where they belong, or build the day as a morning route and an afternoon route.

Stops are example points on real streets, not real customers. Distances and times are driving figures for each order.

Tuesday inspections & radon run7 stops · 14 mi
  1. HomeStart
  2. Ashworth (buyer)Full inspection, agent at end2.2 mi
  3. Radon pickup: InglewoodCollect 48-hr monitor3.7 mi
  4. Re-inspect: Sylvan ParkVerify roof + GFCI repairs0.7 mi
  5. Castellano (buyer)Inspection + sewer scope0.6 mi
  6. Radon drop: 12 SouthSet monitor, leave notice1.5 mi
  7. Brokerage officePick up key, vacant listing0.9 mi
  8. Lab drop-offMold + water samples1.1 mi
Back to home14 mi · 46 min driving
© Mapbox © OpenStreetMap
In the order the list had them20 mi · 1 hr 7 min
© Mapbox © OpenStreetMap
Optimized in one click14 mi · 46 min−31%

Where the day goes

What makes routing hard for home inspectors

01

The inspections are fixed, everything else floats

The buyer, the buyer's agent and sometimes the seller have agreed on 8:30. The radon pickups, the re-inspect and the key run have to fit around that, wherever those houses are.

02

Radon means coming back in two days

Every radon test is two stops at least 48 hours apart. In a busy week there are monitors out all over Davidson County, and forgetting a pickup holds up someone's closing.

03

Agents reschedule and sellers aren't ready

An inspection moves from Tuesday to Wednesday, a vacant listing needs a key from the brokerage first, a utility isn't on. When an anchor moves, the short stops around it move too.

Start from your list

Bring the spreadsheet you already keep.

Agent contacts, fees and report status stay in your inspection software. EZRoutePlanner needs the property address and one label: the client's name on inspection days, or the service type when you're routing a radon run.

  1. 1

    List every stop, not just the inspections

    Paste the day's addresses one per line: inspections, radon drops and pickups, re-inspects, the brokerage for keys, the lab. Label them so the type of stop is obvious.

  2. 2

    Optimize from home

    Set your home office as the base and turn on Round Trip so the day ends back where it started. Then press Optimize Route.

  3. 3

    Line it up with your appointments

    Check the fixed inspections in the order. Move one if it's out of place, or start the route at the first inspection's address and optimize from there.

  4. 4

    Drive it from your phone

    Tap Navigate at each stop for Google Maps, Apple Maps or Waze. Print the PDF route sheet if you like a paper copy on the clipboard.

inspections-week-43.xlsxAddress columns found
ClientProperty addressCityZIPServiceAgent
Ashworth1407 Gallatin AveNashville37206Full inspectionR. Delgado
Castellano2212 Belmont BlvdNashville37212Inspection + sewer scopeT. Wynn
Pruett4610 Utah AveNashville37209Radon pickupT. Wynn
Harlan1203 Shelton AveNashville37216Radon pickupM. Okeke
Vance4401 Nebraska AveNashville37209Re-inspectR. Delgado

An example sheet. Columns can be named anything and in any order; street, city and ZIP can be one column or several. Pick one column, like the customer name, as each stop's label.

From the route

Routing tips for home inspectors

1

Schedule the pickup when you set the monitor

When you drop a radon monitor, you already know the pickup day. Add the address to that day's route right then, and pickups never pile up at the end of the week.

2

Start the afternoon where the morning ended

After a morning inspection, the next leg starts at that house, not at home. Make the afternoon its own route with the morning property as the start and optimize from there.

3

Put the key before the house

A vacant listing whose key is at the brokerage has an order EZRoutePlanner can't know. After optimizing, check that the brokerage comes before the house that key opens, and move it if not.

4

Pin new-construction lots yourself

Pre-drywall and final inspections in new subdivisions often have addresses the maps don't know yet. Click the lot on the map to drop a pin, or paste the coordinates from the builder's site plan.

5

Hold re-inspects for a day you're nearby

Verifying a seller's repairs rarely has to happen tomorrow. Add the re-inspect to whichever day's inspections are on that side of the Cumberland and it costs a few minutes instead of a trip.

6

Keep the route sheet with your mileage records

The PDF route sheet and the Excel export list the approximate driving distance of every leg. Saved with the day's paperwork, they make a tidy record of where you drove. See tracking mileage for multiple stops.

Honest fit

What it handles, and what it doesn't

EZRoutePlanner is built for putting a day of stops in the right order and getting them to whoever drives. Here's where that fits home inspectors, and where you'd want something else alongside it.

Good fit

  • Two or three inspections a day with radon, re-inspect and key stops around them
  • Radon drop-off and pickup runs as their own route
  • New-construction lots pinned by clicking the map or pasting coordinates
  • A printable route sheet with the distance of every leg
  • Multi-inspector firms giving each inspector a route link (paid plans)

Not built for

  • No appointment times: it won't keep the 1:00 inspection at 1:00
  • No agent or client notifications
  • Doesn't book inspections or time radon tests
  • No inspection reports, agreements or payments

Last reviewed October 21, 2026.

Home inspectors: questions

Do home inspectors need a route planner with only two or three inspections a day?

Not for the inspections alone; Google Maps handles three addresses fine. It pays off when the day also has radon monitors to set and collect, re-inspects, key pickups and a lab drop-off, or when a firm is routing several inspectors at once.

How do I plan radon monitor drop-offs and pickups?

Treat each test as two stops on two days. When you set a monitor, add the pickup address to the route for the day it's due. On heavy weeks, run the pickups as their own route and optimize it: it's many short stops, which is where ordering saves the most.

Can I keep inspection appointment times in EZRoutePlanner?

No, there are no time windows. Keep times in your scheduling software and check the optimized order against them. If an inspection has to come first, start the route at that address.

Can I add a new-construction address that isn't on the map yet?

Yes. Click the map where the lot is to drop a pin, or paste its latitude and longitude. You can drag any pin to the right spot, and the nearest address is filled in.

Can I use the route for my mileage log?

The route sheet and the Excel or CSV export include the approximate driving distance of each leg, which many inspectors keep with their records. It's a plan of the day, not GPS tracking, so note any detours yourself.

How do multi-inspector firms split the day?

Put every stop for the day on one map and lasso each inspector's stops into a route of their own; each route gets a color. Share each route as a link. EZRoutePlanner won't assign inspections automatically, so whoever schedules decides who goes where.

Plan tomorrow's inspection route tonight.

Import your customer list, optimize the order with one click, and open it on your phone in the morning. Free to start, no credit card.

Free plan. No credit card. Works in any browser.

Home Inspector Route Planner: Plan Inspection Days Free