EZRoutePlanner

Delivery & couriers

Route planner for furniture and appliance delivery

Eight to fifteen stops a day, each with stairs, assembly or an old fridge to haul away. Put the day in the shortest order from the warehouse so the crew's time goes into the houses, not the cab.

Free plan, no credit card. Works on your phone and computer.

© Mapbox © OpenStreetMap
Saturday delivery truck10 stops · 8.8 mi
  1. WarehouseStart
  2. GutierrezSectional, second-floor walk-up0.2 mi
  3. WhitmanWasher & dryer install, haul away the old pair1.2 mi
  4. Castle Hills dental office8 waiting-room chairs, assemble1.0 mi
  5. FuentesRefrigerator, take the doors off to fit0.7 mi
  6. HollisterKing bed, assemble, remove old mattress0.6 mi
  7. + 5 more stops
Back to warehouse8.8 mi · 36 min driving

EZRoutePlanner for furniture & appliance delivery

EZRoutePlanner puts a furniture or appliance delivery day in the shortest order from your warehouse. Import the day's tickets, press Optimize Route, and send the crew lead a link with a Navigate button for each stop. It orders by distance, not by install time or truck size, so you judge how long the day runs. Free covers 30 stops; paid plans start at $20 a month.

Typical day
8–15 stops per two-person crew
Stop length
15 minutes for a drop, an hour or more for installs
Routes
One per truck, each its own color on one map
Crew lead
A phone link or a printed route sheet

An example day

Saturday delivery truck

This example is 10 stops on real roads in San Antonio, Texas. In the order the list had them, the round trip is 14 mi and 57 min of driving. Optimized, it's 8.8 mi and 36 min: 5.5 mi and 21 min less, 39% shorter.

Install stops run long and unevenly, so a furniture route is less about saving a mile than about not crossing town between two hour-long installs. Optimize first, then look at the day as a whole: if it doesn't fit, move the farthest stop to tomorrow's truck.

Stops are example points on real streets, not real customers. Distances and times are driving figures for each order.

Saturday delivery truck10 stops · 8.8 mi
  1. WarehouseStart
  2. GutierrezSectional, second-floor walk-up0.2 mi
  3. WhitmanWasher & dryer install, haul away the old pair1.2 mi
  4. Castle Hills dental office8 waiting-room chairs, assemble1.0 mi
  5. FuentesRefrigerator, take the doors off to fit0.7 mi
  6. HollisterKing bed, assemble, remove old mattress0.6 mi
  7. MorenoDining set, 6 chairs, white glove1.0 mi
  8. KaplanDishwasher install, water hookup0.4 mi
  9. Stone Oak model homePick up staging furniture0.9 mi
  10. VillarrealRecliner, ground floor0.8 mi
  11. BustamanteElectric range, check the outlet0.7 mi
Back to warehouse8.8 mi · 36 min driving
© Mapbox © OpenStreetMap
In the order the list had them14 mi · 57 min
© Mapbox © OpenStreetMap
Optimized in one click8.8 mi · 36 min−39%

Where the day goes

What makes routing hard for furniture and appliance delivery teams

01

Ten minutes here, two hours there

A recliner drop and a washer install with haul-away aren't the same kind of stop. A planner that counts distance can't see that, so the crew lead still judges how long the day really is.

02

A box truck isn't a car

Low trees, tight cul-de-sacs, gated communities and apartment complexes with one loading spot. The shortest road isn't always the one a box truck wants.

03

Customers block out the day

Furniture customers take time off to wait. When the third install runs long, every stop after it is late, and the phone starts ringing.

Start from your list

Bring the spreadsheet you already keep.

Item lists, haul-away flags and install notes stay on your tickets: EZRoutePlanner keeps the address and one label. If the crew needs the item on the route, add a column to your sheet that joins name and item, like Fuentes · fridge, haul away, and pick it as the label.

  1. 1

    Load the day's tickets

    Import the delivery tickets from your POS or warehouse system as CSV or Excel, or paste the addresses. Label each stop with the customer's name.

  2. 2

    One route per truck

    Lasso the stops for each truck and crew. Every route gets its own color, so the map shows who's going where.

  3. 3

    Optimize from the warehouse

    Set the warehouse as the base and press Optimize Route. Use Round Trip if the truck comes back to reload.

  4. 4

    Hand the crew lead the route

    Share the link or QR code, or print the PDF route sheet for the cab. The crew navigates each stop in Google Maps, Apple Maps or Waze.

deliveries-saturday.xlsxAddress columns found
TicketCustomerAddressCityZIPItemsHaul-away
SA-10421Gutierrez7230 Blanco RdSan Antonio78216SectionalNo
SA-10424Whitman418 Burr RdSan Antonio78209Washer + dryerYes
SA-10430Fuentes1127 S Presa StSan Antonio78210RefrigeratorYes
SA-10433Hollister20311 Huebner RdSan Antonio78258King bedMattress
SA-10437Moreno6231 Bandera RdLeon Valley78238Dining setNo

An example sheet. Columns can be named anything and in any order; street, city and ZIP can be one column or several. Pick one column, like the customer name, as each stop's label.

From the route

Routing tips for furniture and appliance delivery teams

1

Check where the long installs land

Crews and customers both run out of patience late in the day. If the two longest installs land last, drag one earlier; a few extra miles cost less than an overtime hour.

2

Look at each approach before the truck does

Zoom in on new stops: one-lane drives, low branches, gated streets. If the truck should park around the corner, drag the pin there and the nearest address is filled in.

3

End the day at the recycler

Haul-away fridges and washers have to go somewhere. Pin the recycling center or donation drop as the last stop instead of using Round Trip, so old appliances don't ride back to the warehouse.

4

Call customers in route order

EZRoutePlanner doesn't send ETAs, so the evening-before call is yours. Ring customers in stop order with a rough slot (morning, midday, afternoon); an optimized order makes those guesses hold up.

5

Send installs to the crew that can do them

Gas and water hookups often need a certified installer. Lasso the install stops into that crew's route first, then split the plain drops between the other trucks. See routes for multiple drivers.

6

Put a printed sheet on the dash

With one crew member driving, the other reads the PDF route sheet with leg distances and calls the next customer. It's quicker than passing a phone across the cab.

Honest fit

What it handles, and what it doesn't

EZRoutePlanner is built for putting a day of stops in the right order and getting them to whoever drives. Here's where that fits furniture and appliance delivery teams, and where you'd want something else alongside it.

Good fit

  • Furniture stores and appliance dealers running their own trucks
  • Two-person crews with 8–15 stops a day
  • Haul-away days that end at a recycler or donation center
  • Two or three trucks, each with its own colored route
  • Third-party delivery crews working from a store's ticket list

Not built for

  • No truck routing: bridge heights, weight limits and truck-restricted roads aren't considered
  • Doesn't add install time to the order or the length of the day
  • No delivery windows or customer ETA texts
  • No signatures or damage photos at delivery
  • No load planning or truck capacity

Last reviewed October 21, 2026.

Furniture & appliance delivery: questions

How do furniture stores plan delivery routes?

Most group the next day's tickets by area, one area per truck, then order each truck's stops from the warehouse and call customers with a time slot. In EZRoutePlanner you import the tickets, lasso each truck's stops, and optimize each route; the calls and the time slots stay with you.

How many deliveries can a furniture crew make in a day?

Commonly 8–15, depending on installs, stairs and haul-aways. A day of simple drops can go past 20; a day of built-in appliance installs may be six. Try your own install times in the stops per day calculator.

Does it plan routes for box trucks?

No. Routes follow regular driving roads, without truck restrictions like bridge heights or weight limits. Crews in larger trucks should check the approach to each stop and use truck-aware navigation if they need it.

Can I add install time to each stop?

No. EZRoutePlanner orders by distance and doesn't take service time into account. Keep install estimates on your tickets and use them to decide how many stops go on each truck.

Can I give customers a delivery window?

Not through EZRoutePlanner; it has no time windows and doesn't send texts. Many stores call or text customers themselves the evening before with a morning or afternoon slot, using the optimized order to estimate it.

Can each crew have its own route?

Yes, on paid plans. Make one route per truck by lassoing stops on the map, each in its own color, and send each crew lead its own link. The stops aren't divided between trucks automatically; see route planning for small businesses for how pricing works with several trucks.

Plan tomorrow's truck route tonight.

Import your customer list, optimize the order with one click, and open it on your phone in the morning. Free to start, no credit card.

Free plan. No credit card. Works in any browser.

Furniture & Appliance Delivery Route Planner for Crews