EZRoutePlanner

Trades & repair

Route planner for electricians

Service calls, EV charger quotes, a will-call pickup and the rough-in inspection: one map, the shortest order, and a link on each van's phone before the first call.

Free plan, no credit card. Works on your phone and computer.

© Mapbox © OpenStreetMap
Thursday service calls11 stops · 19 mi
  1. ShopStart
  2. Supply houseWill-call: 200A panel, wire1.6 mi
  3. ReynoldsBreaker keeps tripping1.3 mi
  4. Fountain Square remodelRough-in inspection0.7 mi
  5. OkoroEV charger estimate2.1 mi
  6. Broad Ripple taproomWalk-in cooler circuit2.5 mi
  7. + 6 more stops
Back to shop19 mi · 58 min driving

EZRoutePlanner for electricians

An electrician route planner puts the day's service calls, estimates and supply house stops in the shortest order from the shop. In EZRoutePlanner you import or paste the calls, press Optimize Route, and share each van's route as a link. When an emergency comes in, you add it and re-optimize; there's no live dispatch. The free plan covers 30 calls a route; paid plans start at $20 a month.

Typical day
4–8 service calls, or one site on project days
Extra stops
Supply house, inspections, estimates
Vans
One color-coded route per van (paid plans)
Emergencies
Add the call, re-optimize the rest

An example day

Thursday service calls

This example is 11 stops on real roads in Indianapolis, Indiana. In the order the list had them, the round trip is 31 mi and 1 hr 30 min of driving. Optimized, it's 19 mi and 58 min: 12 mi and 32 min less, 39% shorter.

This is a heavy service day: short calls and quotes with a supply house pickup and one inspection meet. Optimize it before the vans leave. When a no-power call comes in mid-morning, add it, set it as the route's next start, and re-optimize what's left. EZRoutePlanner reorders known stops; it doesn't dispatch or track vans.

Stops are example points on real streets, not real customers. Distances and times are driving figures for each order.

Thursday service calls11 stops · 19 mi
  1. ShopStart
  2. Supply houseWill-call: 200A panel, wire1.6 mi
  3. ReynoldsBreaker keeps tripping1.3 mi
  4. Fountain Square remodelRough-in inspection0.7 mi
  5. OkoroEV charger estimate2.1 mi
  6. Broad Ripple taproomWalk-in cooler circuit2.5 mi
  7. KowalskiGFCI outlets, kitchen + bath4.0 mi
  8. Maple Ct rentalSmoke detectors, PM tenant0.9 mi
  9. DelacroixCeiling fan install1.5 mi
  10. Irvington bungalowKnob-and-tube walkthrough2.3 mi
  11. HainesDead outdoor circuit0.5 mi
  12. Lakeside DentalParking lot lights out1.1 mi
Back to shop19 mi · 58 min driving
© Mapbox © OpenStreetMap
In the order the list had them31 mi · 1 hr 30 min
© Mapbox © OpenStreetMap
Optimized in one click19 mi · 58 min−39%

Where the day goes

What makes routing hard for electricians

01

Calls book by phone, not by neighborhood

Customers call when something breaks and book the first open slot. Thursday ends up with jobs in Carmel, Greenwood and Speedway, and the van crosses I-465 four times.

02

Material runs break the loop

A will-call order, a breaker the van doesn't carry, a panel that came in a day late. A supply house run in the wrong place turns a 10-minute stop into an hour.

03

Inspections and project days don't move

You need to be on site when the inspector shows up, and a project day ties up a van and a crew. The service calls around them still have to get done.

Start from your list

Bring the spreadsheet you already keep.

Job numbers, hours and notes stay in your field service software. EZRoutePlanner takes the address and one label, like the customer name or job number, and shows every call on a review map before import, so a mistyped house number gets caught at the desk instead of the curb.

  1. 1

    Pull the day's calls into one list

    Export tomorrow's jobs from your field service software or calendar as CSV or Excel, or paste the addresses one per line. Pick the customer or job number as the label.

  2. 2

    Add the supply house and the inspection

    They're stops too. Put them in the list so they're part of the order, not detours.

  3. 3

    Optimize from the shop

    Set the shop as the base, turn on Round Trip, and press Optimize Route.

  4. 4

    Send each van its route

    Send every van its own link or QR code. The electrician taps Navigate at each call and drives with Google Maps, Apple Maps or Waze.

service-calls-thu.csvAddress columns found
Job #CustomerAddressCityZIPJob typeEst. hours
4471Reynolds5320 N Keystone AveIndianapolis46220Troubleshoot1.5
4472Okoro1128 E 54th StIndianapolis46220EV charger estimate0.5
4475Kowalski3615 N Pennsylvania StIndianapolis46205GFCI install1
4478Delacroix907 N Hawthorne LnIndianapolis46219Ceiling fan1.5
4480Haines2214 Shelby StIndianapolis46203Dead circuit1

An example sheet. Columns can be named anything and in any order; street, city and ZIP can be one column or several. Pick one column, like the customer name, as each stop's label.

From the route

Routing tips for electricians

1

Start at the supply house when the first call needs it

If the first job can't start without a panel or a spool of wire, make the supply house the route's start instead of the shop and optimize from there. Everything after it falls into order.

2

Split an inspection day in two

Build a morning route that ends at the inspection site (pin it as the last stop) and an afternoon route that starts there. You're on site when the inspector arrives, and neither half of the day zig-zags.

3

Batch quotes by side of town

EV charger and panel upgrade estimates are short, unpaid stops. Hold them for a day when the van is already in that area, add them to that route, and re-optimize.

4

Move the start for a no-power call

When an urgent call comes in, add the address, set it as the route's next start, and press Optimize Route. The rest of the day reorders after it, and the shared link on the van's phone updates.

5

Divide the map between vans yourself

Put every call on one map, then lasso the north-side calls into one van's route and the south-side calls into the other's. EZRoutePlanner doesn't split jobs by skill or license; you decide who goes where. See planning routes for more than one driver.

6

Read the legs, not the pins

Two pins that look close can be a long drive across a rail yard or the far side of I-465. Every leg shows its real driving distance, which tells you more than the map at a glance.

Honest fit

What it handles, and what it doesn't

EZRoutePlanner is built for putting a day of stops in the right order and getting them to whoever drives. Here's where that fits electricians, and where you'd want something else alongside it.

Good fit

  • Residential and light commercial service days of 4–10 calls
  • Supply house, inspection and estimate stops in the same order
  • One color-coded route per van on one map (paid plans)
  • Re-ordering the rest of the day after an emergency call
  • Electricians navigating from a link on their phone, no app

Not built for

  • No live dispatch, call queue or GPS tracking of vans
  • No time windows for inspection slots or customer appointments
  • Doesn't assign calls by skill or license; you choose each van's stops
  • No estimates, invoicing or permit tracking

Last reviewed October 21, 2026.

Electricians: questions

What's the best route planner for electricians who run service calls?

For a shop with one to a handful of vans that already books jobs in a calendar or field service app, a route planner that optimizes each van's day is usually all that's missing. EZRoutePlanner does that from $0 (30 stops a route free). Larger shops that need live dispatch and van tracking use field service software with routing built in.

What happens to my route when an emergency call comes in?

You add the address, set it as the route's next start, and re-optimize the remaining calls after it. The van's shared link updates with the new order. EZRoutePlanner doesn't dispatch on its own or know where the van is, so the call is yours to make.

Can I plan routes for several electricians at once?

Yes, on paid plans. All the calls go on one map; you lasso each electrician's area into a route, and each route gets its own color. Share each route with its electrician. Calls aren't divided automatically.

Can I import jobs from my field service software?

If it exports CSV or Excel, yes. EZRoutePlanner finds the address columns even when street, city and ZIP are separate, and flags any address it isn't sure about before import (here's how to fix addresses that won't geocode). Files up to 20 MB work. Only the address and one label column are kept.

Does it help on project days?

Less. A crew at one commercial site all day doesn't need a route. Where it helps is the rest of the shop: put the project site aside and optimize the service vans that are still running calls around it.

Can I plan a route around an inspection appointment?

There are no time windows, so EZRoutePlanner won't hold an inspection to 10 a.m. The practical way is to end a morning route at the site and start an afternoon route there, or start the day at the site if the inspection is first thing.

Plan tomorrow's service route tonight.

Import your customer list, optimize the order with one click, and open it on your phone in the morning. Free to start, no credit card.

Free plan. No credit card. Works in any browser.

Electrician Route Planner: Optimize Service Calls Free